Gakushin Flat Table Accessory
Schap’s Gakushin Flat Table Accessory, when used with the Gakushin tester, allows the operator to perform rubbing test on a flat instead of a curved surface. The 6 station tester has a designed cycle rate of 30 CPM, but can be adjusted for your specific application up to 60 CPM. The standard stroke is 100mm.
You can fasten your samples so that they lay on Gakushin Flat Table Accessory, and then put your abradant material on the 200 or 500 gram heads. You can also add additional weights to the heads (300g, 500g, or 800g weights) for those tests where you want to increase the force applied. There are spring loaded clamps on both the base and the heads to help keep the samples and the abradant in place. You can then set the cycle counter for the desired number of cycles and view the samples at the end of the test for abrasion.
Since the materials used to build the Gakushin tester and the flat plate are either aluminum or stainless steel you can run the test either wet or dry. All of our heads and weights are carefully manufactured to be within ± 0.5% of the weight for better accuracy (so, a 500g head or weight will be between 497.5g and 502.5g). Other weights can be supplied – please consult the factory for details.
|Dimensions||38 x 17 x 3 mm|