Universal Life Tester Pneumatic Valve Pack

This is a package of four, three position valves with regulators designed for use with our Universal Life Testers.  The package can be connected to either our PLC based Life Testers or our PC based Life Testers.  The package has four cables with male plugs designed to mate with our Life Tester voltage outputs.  One cable and valve are connected to each channel on the tester.  

The valve pack allows operation of pneumatic devices such as cylinders or actuators at adjustable pressures.  Forward output from the Life Tester will operate one "on" position of the corresponding valve and the Reverse output from the Life Tester will operate the opposite "on" position of the corresponding valve.  If the channel is off, the valve is in its all ports open position.

Air pressure is supplied through a filter-regulator attached to the valve pack and pressures up to 100 psi can be used. Separate regulators for each direction of each valve are included for better control of devices connected to individual channel-directions 

choose image to enlarge