Wyzenbeek Classic







Wyzenbeek Abrasion Tester

Our four station oscillatory "double-rub" material abrasion tester is used to determine the abrasion resistance of textiles, fabric, vinyl, leather, stitched seams, and other materials.

 

Each station has individual specimen tension and pad pressure settings. Three station supports are provided, allowing the operator to run 1-4 specimens.

 

If your machinery requires OSHA or European CE comformity, our Wyzenbeek CE Compliant Abrasion Tester meets these requirements.

 

For more information, please contact Chad at 616-846-6530 X224 or [email protected]

Wyzenbeek Classic Features:

  • Robust mechanical components are constructed of Aluminum and Stainless Steel
  • Durable Powder Coat and Anodized finishes
  • High Quality THK Precision Bearings
  • Programmable count-up controller with automatic stop
  • Adjustable jog and test speed controls
  • Supply voltages vary and must be specified at time of purchase
  • High quality brushless electric motor
  • 1 year manufacturer's warranty

The Wyzenbeek Test Method

Individual test specimens cut from the warp and weft are rubbed back and forth using an ACT approved #10 cotton duck fabric, or wire mesh screen as the abradant (Both available from Schap).

 

Each station holds a specimen taught, utilizing contoured foam pads to apply pressure. The abradant is affixed to the oscillating drum, which abrades the specimens for a prescribed number of cycles.

 

The end point is reached when two yarn breaks occur or when appreciable wear is reached or when 100,000 double rubs are reached. The samples should be checked every 5,000 double rubs, and when an end point is reached because of failure,

 

The rater should back up to the previous 5,000 double rub checkpoint as the test result of abrasion resistance. The test results are therefore to be reported in 5,000 double rub increments.

Part & Accessories

Documents

Informational Videos

Please note, the videos below feature the OSHA / CE compliant version which has a plexiglass protective cover. The Wyzenbeek Classic does not include this cover.

 

Available for Rent

This item is available for rent. For more information, please contact Chad Weavers by calling 616-846-6530.

Email:

[email protected]



Rental Terms

  • Minimum rental period is 1 month. After the first month, rentals can be prorated in 1/4 month intervals.
  • Schap Specialty Machine, Inc. handles maintenance issues during the rental period(s).
  • For the first 3 months, 100% of the rental payment for each unit is applied toward purchase of that unit.
  • After 3 months, 20% of the rental payment for each unit is applied toward purchase of that unit.
  • The minimum purchase price of each unit is 50% of its original value.
  • Schap Specialty Machine, Inc. will review the condition of the rental equipment upon return, and any repairs that exceed normal wear and tear will be charged to the renter.

More Information

Product Weight

80 lbs / 36 kgs

Shipping Weight

130 lbs / 59 kgs

Stations

4

Specifications

 

 

ASTM D3597 

 

ASTM D4157 

 

FED-STD-191/5304 

 

SAE J1530 

 

GM 2756M 

 

GM 2756M 

 

TOYOTA TSL 5101G 3.9.4 

 

LP-463KC-04-01 

 

LP-463KB-06-01 

 

SAE J 948 

 

CFFA-1A