Combination Flex Tester


The Combination Flex tester provides the ability to test either Newark (ASTM D2097) or Ford (BN 102-02) flex tests on one machine. The tester is typically used to test leather and vinyl materials. Up to seven (7) stations of either test type may be tested at one time. The technician loads the appropriate stations and sets the machine speed switch to begin a test.

The tester includes seven (7) stations with 1 inch (25.4 mm) diameter drums per Ford BN102-02, and 7 stations with 1.50 inch (38 mm) diameters drums per ASTM D 2097. It has a speed selection switch to operate at either 450 cycles per minute (CPM) for Ford, or 500 CPM for ASTM. The stroke is 12.7 mm for Ford, and 1.25 inch for ASTM. Note that only seven (7) stations are usable at any time due to the common operating speed for both sides.

The machine can be configured to meet the requirements of ISO 7854 Section B. Contact us for more detail.

Features:

  • Mechanical components are constructed of non-corrosive Aluminum and Stainless Steel
  • Durable Powder Coat and Anodized finishes
  • Precision ball and needle earings
  • Programmable count-up controller with automatic stop
  • Adjustable jog and test speed controls
  • Vented Protective Cover protects operator hands from pinch points
  • Supply voltages vary and must be specified at time of purchase
  • High quality brushless electric motors
  • 1 year manufacturer's warranty

Documents:

See also:

Available for Rent

This item is available for rent. For more information, please contact Chad Weavers by calling 616-846-6530.

Email:

[email protected]



Rental Terms

  • Minimum rental period is 1 month. After the first month, rentals can be prorated in 1/4 month intervals.
  • Schap Specialty Machine, Inc. handles maintenance issues during the rental period(s).
  • For the first 3 months, 100% of the rental payment for each unit is applied toward purchase of that unit.
  • After 3 months, 20% of the rental payment for each unit is applied toward purchase of that unit.
  • The minimum purchase price of each unit is 50% of its original value.
  • Schap Specialty Machine, Inc. will review the condition of the rental equipment upon return, and any repairs that exceed normal wear and tear will be charged to the renter.

More Information

Product Weight

100 lbs / 45 kgs

Dimensions

48" x 15" x 11"

Stations

14

Specifications

 

 

Ford FLTM BN 102-02 

 

ASTM D2097 

 

TSL 5101G section 3.14.2 B 

 

GM 9226P(withdrawn 2011) 

 

ISO 7854 Section B 

 

TPJLR.52.413 

Schap Laboratory Services

Let Schap Laboratory Services run this test for you. Schap Lab is an independent, third-party test lab accredited to ISO/IEC 17025 by A2LA*. We are built on over 50 years worth of executing test programs, and building test machines. We offer a wide range of capabilities to test materials such as leather, fabric, foam, rubber, plastic, and adhesives. We also offer mechanical, durability and life cycle testing of subcomponents, full assemblies and mechanical systems.

For more information, please contact Erik Johnson by calling 616.844.8259 or send an email to [email protected].

* Not every test offered by Schap Lab is covered by our A2LA accreditation. Please consult our Scope of Accreditation ( Certificate #3611.01 ) for a list of accredited services.