Jounce System



Jounce Tester

The Jounce Tester is intended to evaluate either seat components, or a complete seating system. The evaluation criteria are usually visual. These include wear patterns, or general durability of the seat covering material, the foam, and the support structure underneath.

The upper jounce loading mechanism includes an appropriate body form and loose weights that can be added as necessary. This upper assembly is guided through eight ball bearings and four lightweight aluminum parallel arms, back to the main support frame. The entire set-up is then height adjustable to maintain horizontal parallelism of the arms. There is also an overhead crane to suspend the loading mechanism while test samples are installed or removed.

It is important to notice that this type of mechanical design loads the test sample with the correct amount of body weight without inducing excessive inertia loads, like some other test machines do. These high inertia loads on some competitive equipment increase the severity of the test and may cause some borderline samples to fail when they really do not.

The lower jounce table is servo-hydraulic driven and operated with a P.C. based control system. The vertical movement is sinusoidal and programmable for both frequency and acceleration. For any given acceleration, amplitude decreases as frequency increases. The system is also capable of frequency "sweeps" and other test-dictated sequences. The actual software is custom written by Schap Specialty Machine, Inc. in Visual Basic, which operates in a Windows operating environment.

Generally, this destructive test system is rather simple toset-up and operate. Technicians that are P.C. literate will have no trouble quickly learning how to operate the machine and the software.

Jounce Table

This is a stand alone item that can be rented alone or with an hydraulic power pack and upper frame. The jounce table can produce cyclic (sine wave) outputs ranging from 0.1 Hz to 50 Hz with amplitudes from 0 mm to 50 mm. The table comes with a roll-around control cart, is PC controlled, and has software for seat testing (or any other item needing cyclic or vibration testing) with jounce, as well as resonance and damping. The table can be operated in displacement mode following displacement of the table or the upper (saddle). The table can also be operated in acceleration mode where the amplitude of the jounce is varied to hold a constant acceleration either on the table or the upper (saddle). Acceleration can be controlled from 0 G to 3 G depending on test frequency.

Japanese Style Jounce Upper

This jounce upper is the Japanese, non-counter-weighted style. Loading is accomplished by adding weights to each standard butt form. The butt forms can be raised with the chain fall provided. The chain fall also allows a butt form to be dropped onto a seat which, when used with our jounce table, can calculate the damping factor of the seat. Independent hydraulic squirm is also provided on this station when used in conjunction with an appropriately sized hydraulic power pack.

Accessories

Images:

Documents:

Available for Rent

This item is available for rent. For more information, please contact Chad Weavers by calling 616-846-6530.

Email:

[email protected]



Rental Terms

  • Minimum rental period is 1 month. After the first month, rentals can be prorated in 1/4 month intervals.
  • Schap Specialty Machine, Inc. handles maintenance issues during the rental period(s).
  • For the first 3 months, 100% of the rental payment for each unit is applied toward purchase of that unit.
  • After 3 months, 20% of the rental payment for each unit is applied toward purchase of that unit.
  • The minimum purchase price of each unit is 50% of its original value.
  • Schap Specialty Machine, Inc. will review the condition of the rental equipment upon return, and any repairs that exceed normal wear and tear will be charged to the renter.

More Information

Stations

3

Schap Laboratory Services

Let Schap Laboratory Services run this test for you. Schap Lab is an independent, third-party test lab accredited to ISO/IEC 17025 by A2LA*. We are built on over 50 years worth of executing test programs, and building test machines. We offer a wide range of capabilities to test materials such as leather, fabric, foam, rubber, plastic, and adhesives. We also offer mechanical, durability and life cycle testing of subcomponents, full assemblies and mechanical systems.

For more information, please contact Erik Johnson by calling 616.844.8259 or send an email to [email protected].

* Not every test offered by Schap Lab is covered by our A2LA accreditation. Please consult our Scope of Accreditation ( Certificate #3611.01 ) for a list of accredited services.